Apply the parking brake, then remove the floor console rear finish panel. Apply the parking brake. Remove the floor console finish panel. Remove the adjustment nut clip. Turn the parking brake control adjustment nut so that the parking brake control stroke is three to five notches when pulled. 1 Check that the parking brake is disengaged. It might seem obvious, but the first thing to do is make sure that the parking brake is switched off. Whether you have a parking brake with a hand lever, floor pedal, or electronic switch, make sure it's in the off position. -parking brake indicator light still won't go off -realized that if I push on the air recirculation button (next to the AC button) the parking brake warning and light goes off instantly. -also realized that I am not getting cold air with the AC on now either. One of the common reasons why the dashboard brake light remains on when the emergency brake is off is when there is need for addition of brake fluid. Open the cap, check the level, and add fresh brake fluid as needed. Many cars have a brake fluid reservoir that indicates the fluid level even without opening the cap. Check to ensure you have enough fluid in the brake master cylinder. A lot of vehicles have the sensor which detects the level of the fluid in on the same circuit as the parking brake. If you find this low, you may want to check the condition of your brake pads. Parking brake "engaged" light won't turn off I spent the last 3 days working on the interior of my 2013 SCrew XLT 4x4. I had the negative battery terminal disconnected the whole time, with the exception of reconnecting to move the electric driver's seat to get to all the bolts once to remove the seat and again to reinstall. oQBQkUB.

parking brake alarm won t turn off